JINGSHI Solutions
OCV test equipment
OCV test equipment：It's mainly used for automatic incoming, code scanning, open-circuit voltage measurement, AC internal resistance measurement, case voltage test, and automatic dispatching of lithium batteries. In addition, it also can read MES system information and upload measurement data to the MES system.
|
Main parameters |
Parameter value |
|
|
Single machine capacity |
≥12PPM, customizable |
|
|
Voltage test accuracy |
Voltage range |
0~10V |
|
Test accuracy |
Single instrument ± (0.0035%Set+0.0005%FS) |
|
|
Voltage test accuracy |
Internal resistance range |
0μΩ~3KΩ |
|
Test accuracy |
Single instrument ± (0.5%rdg+10dgt) |
|
|
Test frequency |
1KHZ±0.2HZ |
|
|
Internal resistance repeated test accuracy |
±0.006mΩ |
|
Square cell OCV：Full-automatic loading and dispatching; wide compatible battery range, modular design and convenient changeover; anti-interference design of key mechanisms, subtle eddy current impact; fully automatic in-place calibration in a single machine, good test reproducibility and repeatability.
Pouch cell OCV：Full-automatic loading and dispatching, support single-tray test or customized two-tray test; wide compatible battery range, modular design and convenient changeover; anti-interference design of key mechanisms, super-small eddy current impact; tray-type standard resistance calibration in a single machine, good test reproducibility and repeatability.
Cylindrical cell OCV：Full-automatic loading and dispatching; wide compatible battery range, modular design and convenient changeover; anti-interference design of key mechanisms, subtle eddy current impact; tray-type standard resistance calibration in a single machine, good test reproducibility and repeatability.
Keyword:
Message
Contact
Address of Shenzhen Operation Center:
Building 3#, Vanke Xingcheng, Futong Road, Baoan District, Shenzhen City, Guangdong Province.
Address of Shenzhen Manufacturing Base:
Building 12, Tangtou Industrial Zone, Tangtou Community, Shiyan Street, Baoan District, Shenzhen City, Guangdong Province.
Tel: 86-0755 -29512169 Fax: 86-0755 -29512285
Address of Changsha Manufacturing Base:
No. 151, Xinsheng Road, Yuelu District, Changsha City, Hunan Province.
Tel: 86-0731-88238888 Fax: 86-0731-88907777
Address of Wuhan Manufacturing Base:
No. 600, Huian Avenue, Lingkonggang Economic and Technological Development Zone, Wuhan City, Hubei Province.
Tel: 86-027-59309999 Fax: 86-027-59306666
E- mail: jsh@szjsh.com Web: www.szjsh.com
WeChat account
COPYRIGHTS © 2022 JINGSHI Electromechanical Technology Co., Ltd.